Worldpay Payments Processing

Special

Offer !

Stanley
Trimming Knife

Stanley

199E

£2.63 +VAT

Discounted

Price

Faithfull
Girder Level 600mm

600mm Girder Level

£7.70 +VAT

Discounted

Price

Faithfull
Girder Level 1000mm

1000mm Girder Level

£11.56 +VAT

Discounted

Price

Faithfull
Stabila Box Section Level 24in/600mm

600mm Box

Level

£12.94 +VAT

Discounted

Price

Faithfull
Stabila Box Section Level 40in/1000mm
£17.67 +VAT
discounted
Jo Jo
25 Metre Extension Reel ( 2 sockets )

2 sockets

13 Amp

£18.25 +VAT

Gate Automation Products

Displaying 41 of 41 products.

CE Identification warning plate
Gibidi
CE plate to be fitted on automatic gate installations.
AJ75800/EN CE Identification warning plate Qty £5.00
Add to Basket
Kuda 150 Swing gate automation Kit (24v)
Domestic swing gate automation kit for up to 2.0M leaf and 150kg
Gibidi
1 x PC200 24v control board inc receiver
2 x Kuda 150 rams
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells

This kit is supplied with the PC200 control panel which offers the following features,

Red warning LEDs for N.C. contacts and for programming.
Buttons on the circuit board for programming and learning the radio controls.
Automatic run time learning with simplified procedure.
On-board radio receiver that can store up to 50 radio controls.
Control of the radio transmitter channels via jumpers.
Deceleration during opening and closing.
Deceleration speed adjustable via DIP switch.
Stop and motion inversion after intervention of the safety devices.
Anti-crushing function both at normal speed and in deceleration.
Amperometric reading of motor absorption for the anti-crushing function adjustable via DIP switch.
Pedestrian operation with fixed opening of 5 seconds.
Two N.C. inputs programmable via DIP switch as photocell 1, photocell 2, N.C. frame or as opening device.
Two possible operating logic's : step-by-step with stop or condominium select-able via DIP switch.
Gate phase shift time adjustable via DIP switch.
Programming of automatic closing and pause time via DIP switch.
Provision for use with buffer batteries.
Soft-Start and Soft-Stop to limit mechanical shock.
K150/08/Z1 Kuda 150 Swing gate automation Kit (24v) Qty £620.00
Add to Basket
Kuda 200 Swing gate automation Kit (24v)
Domestic swing gate automation kit for up to 2.5M leaf and 200kg
Gibidi
1 x PC200 24v control board inc receiver
2 x Kuda rams
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells

This kit is supplied with the PC200 control panel which offers the following features,

Red warning LEDs for N.C. contacts and for programming.
Buttons on the circuit board for programming and learning the radio controls.
Automatic run time learning with simplified procedure.
On-board radio receiver that can store up to 50 radio controls.
Control of the radio transmitter channels via jumpers.
Deceleration during opening and closing.
Deceleration speed adjustable via DIP switch.
Stop and motion inversion after intervention of the safety devices.
Anti-crushing function both at normal speed and in deceleration.
Amperometric reading of motor absorption for the anti-crushing function adjustable via DIP switch.
Pedestrian operation with fixed opening of 5 seconds.
Two N.C. inputs programmable via DIP switch as photocell 1, photocell 2, N.C. frame or as opening device.
Two possible operating logic's : step-by-step with stop or condominium select-able via DIP switch.
Gate phase shift time adjustable via DIP switch.
Programming of automatic closing and pause time via DIP switch.
Provision for use with buffer batteries.
Soft-Start and Soft-Stop to limit mechanical shock.


K200/08/Z1 Kuda 200 Swing gate automation Kit (24v) Qty £655.00
Add to Basket
T291 Hydraulic ram system ( 230v )
Gate leafs up to 3.5m
Gibidi
1 x BA230 Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
2 x T291 Hydraulic Rams
1 x CE Identification Warning Plate

This kit is supplied with the BA230 professional LCD control panel which offers many programmable options including slow down open/close. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.

K291/Z1 T291 Hydraulic ram system ( 230v ) Qty £1,090.00
Add to Basket
T291/S Hydraulic Ram System/fast version (230v)
Gate leafs up to 3.5m
Gibidi
1 x F4+ Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
2 x T291/S Hydraulic Rams
1 x CE Identification Warning Plate

This kit is supplied with the BA230 proffesional LCD control panel which offers many programmable options including slow down open/close. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.
K291/S T291/S Hydraulic Ram System/fast version (230v) Qty £1,160.00
Add to Basket
ART 5000 Articulated arm automation kit (230v)
Gate leafs up to 3.0 m
Gibidi
1 x F4+ Control panel
1 x Receiver
2 x 2 Channel transmitter (433mHz)
1 x Pair Photocells
2 x ART 5000 Motors inc limit switches
2 x Steel articulated arms
1 x CE Identification Plate

This kit is supplied with the F4+ control panel. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.

K351/08/Z1 ART 5000 Articulated arm automation kit (230v) Qty £1,180.00
Add to Basket
ART 5024 Articulated Arm Automation Kit (24v)
Gate leafs Up To 3.0m
Gibidi
1 x BA24 Control
1 x Receiver
2 x 4 Channel Transmitter (433mHz)
1 x Pair Photocells
2 x ART 5024 Motors
2 x Steel Articulated Arms
1 x CE Identification Plate

Note : if using the limit switches on this kit they must be connected via screened cable with the screen earthed. we do supply this cable in 100 meter drums and the order code is 86447.
K354/08/Z1 ART 5024 Articulated Arm Automation Kit (24v) Qty £1,253.00
AJ00608 Charger PCB for Batteries on BA24 Qty £75.00
PS-1270/2 (2 BATT PACK) 7.0 Ah battery ( 2 required for BA24 batt backup ) Qty £26.00
Add to Basket
MEKA BL240 electro mechanical twin ram kit (24v)
Gate leafs up to 2.5M without electric lock
Gibidi
1 x BA24 professional LCD panel
1 x receiver 433Mhz
2 x 4 channel transmitters (433Mhz)
1 x set of DCF180 photocells
2 x Meka BL240 electro mechanical rams with limit switches (24vdc)
1 x CE Identification Plate

This kit is supplied with the BA24 professional control panel offering many programmable options including slow down, anti crushing, stopping of gates without gate stops and many others.

Note : if using the limit switches on this kit they must be connected via screened cable with the screen earthed. we do supply this cable in 100 meter drums and the order code is 86447.

K240/08/Z1 MEKA BL240 electro mechanical twin ram kit (24v) Qty £860.00
AJ00608 Charger PCB for Batteries on BA24 Qty £75.00
PS1230/2 (2 BATT PACK) 3.4 Ah battery ( 2 required for BA24 batt backup ) Qty £20.00
Add to Basket
MEKA BL233 Long stroke electro mechanical ram kit (230v)
Gate leafs up to 5.0 m
Gibidi
1 x F4+ Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
2 x MEKA BL233 Long Stroke Electro-mechanical rams inc limit switches.
1 x CE Identification Warning Plate


The rams included in this kit are extra long stroke ,suitable for long leaf gates and also installations where geometry measurements of normal stroke rams are not possible due to hinge positions on posts.

This kit is supplied with the F4+ control panel. It offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.



K233/Z1 MEKA BL233 Long stroke electro mechanical ram kit (230v) Qty £1,140.00
Add to Basket
Electro Mechanical Underground Kit (230v)
Gate leafs up 3.5 m
Gibidi
1 x F4+ Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
2 x Galvanised Foundation Boxes
2 x GROUND 610 Underground Motors
1 x CE Identification Plate

This kit is supplied with the F4+ control panel. It offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.

K610/08/Z1 Electro Mechanical Underground Kit (230v) Qty £1,115.00
Add to Basket
Electro mechanical underground automation kit (230v)
Gate leafs up to 3.0 m
Gibidi
1 x F4+ Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
2 x Galvanized Foundation Boxes
2 x R21 Underground Motors
1 x CE Identification Warning Plate

This kit is supplied with the F4+ control panel. It offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.


KR21 Electro mechanical underground automation kit (230v) Qty £1,175.00
Add to Basket
Floor 830 hydraulic underground system with slow down (230v)
180 degree rotation gate leafs up to 3.0 m
Gibidi
1 x F4+ Professional Control Panel
1 x receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
2 x Self Supporting Galvanized Foundation Boxes (600kg)
2 x Floor 830 Hydraulic Jacks (180 deg )
1 x CE Identification Plate

This kit is supplied with the BA230 professional LCD control panel which offers many programmable options including slow down on open and close. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.
K830/Z1 Floor 830 hydraulic underground system with slow down (230v) Qty £1,815.00
Add to Basket
Floor 830 hydraulic underground system with slow down (230v)
180 degree rotation & limit switches gate leafs up to 3.0 m
Gibidi
1 x F4+
1 x receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
2 x Self Supporting Galvanized Foundation Boxes (600kg)
2 x Floor 830 Hydraulic Jacks (180 deg )
2 x Limit switch kits
1 x CE Identification Plate

This kit is supplied with the BA230 professional LCD control panel which offers many programmable options including slow down open/close. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.
The kit is also supplied with a limit switch kit for each motor therefore negating the need for gate stops.
K830/Z1/limit Floor 830 hydraulic underground system with slow down (230v) Qty £1,875.00
Add to Basket
Floor 824 hydraulic underground system ( 24v )
180 degree rotation & limit switches gate leafs up to 3.0 m
Gibidi
This kit provides anti crushing with obstacle detection and slow down to comply with EN12453.

1 x BA24 Professional LCD Control Panel
1 x receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
2 x Self Supporting Galvanized Foundation Boxes (600kg)
2 x Floor 824 Hydraulic 24v Jacks (180 deg )
2 x Limit switch kits
1 x CE Identification Plate

This kit is supplied with the BA24 professional LCD control panel which offers many programmable options including slow down open/close and anti crushing. It also offers the facility for safety edges to be connected to provide additional obstacle recognition which addresses requirements of EN12453.

Note : if using the limit switches on this kit they must be connected via screened cable with the screen earthed. we do supply this cable in 100 meter drums and the order code is 86447.

K825/08/Z1 Floor 824 hydraulic underground system ( 24v ) Qty £1,970.00
AJ00608 Charger PCB for Batteries on BA24 Qty £75.00
PS-1270/2 (2 BATT PACK) 2 x 7.0 Ah battery for BA24 batt backup Qty £52.00
Add to Basket
T391 hydraulic industrial ram system ( 230v )
Gate leafs up to 4.5m
Gibidi
1 x F4+ Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
2 x T391 Hydraulic Rams
1 x CE Identification Warning Plate

This kit is supplied with the BA230 professional LCD control panel which offers many programmable options including slow down on open and close. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.
K391 T391 hydraulic industrial ram system ( 230v ) Qty £1,397.00
Add to Basket
T391/S Industrial hydraulic ram system fast version ( 230v )
Gate leafs up to 4.5m
Gibidi
1 x F4+ Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
2 x T391/S Hydraulic Rams
1 x CE Identification Warning Plate

This kit is supplied with the BA230 professional LCD control panel which offers many programmable options including slow down on open and close. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.
K391/S T391/S Industrial hydraulic ram system fast version ( 230v ) Qty £1,460.00
Add to Basket
T441 Industrial long stroke hydraulic ram system ( 230v )
Gate leafs up to 5.5m
Gibidi
1 x BA230 Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
2 x T441 Long Stroke Hydraulic Rams
1 x CE Identification Warning Plate

This kit is supplied with the BA230 professional LCD control panel which offers many programmable options including slow down open/close. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.
K441 T441 Industrial long stroke hydraulic ram system ( 230v ) Qty £1,505.00
Add to Basket
T441/S Industrial long stroke hydraulic ram system fast version (230v)
Gate leafs up to 5.5m
Gibidi
1 x BA230 Control
1 x Receiver
2 x 4 Channel transmitters (433 mHz)
1 x Pair DCF180 Photocells
2 x T441/S Long stroke hydraulic rams

This kit is supplied with the BA230 professional LCD control panel which offers many programmable options including slow down open/close. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.
K441/S T441/S Industrial long stroke hydraulic ram system fast version (230v) Qty £1,580.00
Add to Basket
T291 Single Hydraulic Ram System ( 230v )
Gate leafs up to 3.5m
Gibidi
1 x F4+ Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
1 x T291 Hydraulic Ram
1 x CE Identification Warning Plate

This kit is supplied with the BA230 professional LCD control panel which offers many programmable options including slow down open/close. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.

K291/L1 T291 Single Hydraulic Ram System ( 230v ) Qty £790.00
Add to Basket
T291/S Single hydraulic ram system fast version ( 230v )
Gate leafs up to 3.5m
Gibidi
1 x F4+ Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
1 x T291/S Hydraulic Ram
1 x CE Identification Warning Plate

This kit is supplied with the BA230 professional LCD control panel which offers many programmable options including slow down open/close. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.
K291/S/L1 T291/S Single hydraulic ram system fast version ( 230v ) Qty £878.00
Add to Basket
Meka BL240 single electro mechanical ram system ( 24v DC )
Gate leafs up to 2.5M without electric lock
Gibidi
1 x BA24 professional LCD panel
1 x receiver 433Mhz
2 x 4 channel transmitters (433Mhz)
1 x set of DCF180 photocells
1 x Meka BL240 electro mechanical ram with limit switches (24vdc)

24vdc rams offer anti crushing helping to address requirements set out in EN12453.

This system has limit switches and provides the facility for slow down in opening and closing. The limit switches must be used for the correct operation of the system however this allows installation without ground stops thus reducing the actual installation work. The ram can automate up to a 3.5 meter 5 bar gate but we recommend the use of a mag lock for gates of this size.

Note : If using the limit switches on this kit they must be connected via screened cable with the screen earthed. We supply this cable in 100 meter drums and the order code is 86447.

K240/L1 Meka BL240 single electro mechanical ram system ( 24v DC ) Qty £674.00
AJ00608 Charger PCB for Batteries on BA24 Qty £75.00
PS1230/2 (2 BATT PACK) 3.4 Ah battery ( 2 required for BA24 batt backup ) Qty £20.00
Add to Basket
ART 5000 Single articulated arm automation system (230v)
Gate leafs up to 3.0m
Gibidi
1 x F4+ Control
1 x Receiver
2 x 2 Channel Transmitters (433 mHz)
1 x Pair Photocells
1 x Art 5000 Motor inc. Limit Switches
1 x Steel Articulated Arm
1 x CE Identification Plate

This kit is supplied with the F4+ control panel. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.
K351/L1 ART 5000 Single articulated arm automation system (230v) Qty £826.00
Add to Basket
ART 5024 single articulated arm automation system (24v)
Gate leafs Up To 3.0m
Gibidi
1 x BA24 Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair Photocells
1 x Art 5024 Motor
1 x Steel Articulated Arm
1 x CE Identification Plate

This kit is supplied with the BA24 control panel providing slow down and anti crushing which conforms to requirements set out in EN12453. The motors are also equipped with limit switches removing the need to install physical ground stops.

Note : If using the limit switches on this kit they must be connected via screened cable with the screen earthed. We supply this cable in 100 meter drums and the order code is 86447.

K354/L1 ART 5024 single articulated arm automation system (24v) Qty £901.00
AJ00608 Charger PCB for Batteries on BA24 Qty £75.00
PS1230/2 (2 BATT PACK) 3.4 Ah battery ( 2 required for BA24 batt backup ) Qty £20.00
Add to Basket
MEKA BL233 Single long stroke electro-mechanical ram system ( 230v )
Gate leafs up to 5.0 metres
Gibidi
1 x F4+ Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
1 x MEKA BL233 Long Stroke Electro-mechanical ram including limit switches.
1 x CE Identification Plate

The ram included in this kit is an extra long stroke suitable for long leaf gates and also installations where geometry measurements of normal stroke rams are not possible due to hinge positions on posts.

This kit is supplied with the F4+ control panel. It offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.

K233/L1 MEKA BL233 Single long stroke electro-mechanical ram system ( 230v ) Qty £855.00
Add to Basket
T391 Single industrial hydraulic ram system ( 230v )
Gate leafs up to 4.5m
Gibidi
1 x F4+ Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
1 x 391 Hydraulic Ram
1 x CE Identification Warning Plate

This kit is supplied with the BA230 professional LCD control panel which offers many programmable options including slow down open/close. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.
K391/L1 T391 Single industrial hydraulic ram system ( 230v ) Qty £940.00
Add to Basket
SLIDY/I Sliding Gate Motor Foundation Plate
Casit
Foundation plate that can be concreted into the ground allowing a firm base and mountings to fix the operator down.

SLIDY/I Motor mount.
LL178F1 SLIDY/I Sliding Gate Motor Foundation Plate Qty £70.00
Add to Basket
T391/S Single industrial hydraulic ram system fast version ( 230v )
Gate leafs up to 4.5m
Gibidi
1 x F4+ Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
1 x 391/S Hydraulic Ram
1 x CE Identification Warning Plate

This kit is supplied with the BA230 professional LCD control panel which offers many programmable options including slow down on open and close. It also offers the facility for safety edges to be connected to provide anti crushing which addresses the requirements of EN12453.
K391/S/L1 T391/S Single industrial hydraulic ram system fast version ( 230v ) Qty £970.00
Add to Basket
T441 Single long stroke industrial hydraulic ram system ( 230v )
Gate leafs up to 5.5m
Gibidi
1 x F4+ Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
1 x T441 Long Stroke Hydraulic Rams
1 x CE Identification Plate

This kit is supplied with the BA230 professional LCD control panel which offers many programmable options including slow down open/close. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.
K441/L1 T441 Single long stroke industrial hydraulic ram system ( 230v ) Qty £990.00
Add to Basket
T441/S Single long stroke industrial hydraulic ram system fast Version (230v)
Gate leafs up to 5.5m
Gibidi
1 x F4+ Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
1 x T441/S Long Stroke Hydraulic Rams
1 x CE Identification Warning Plate

This kit is supplied with the BA230 professional LCD control panel which offers many programmable options including slow down open/close. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.
K441/S/L1 T441/S Single long stroke industrial hydraulic ram system fast Version (230v) Qty £1,010.00
Add to Basket
Floor830 Single Hydraulic Underground System With Slow Down
180 degree rotation Gate leafs up to 3.0 m
Gibidi
1 x F4+
1 x reciever
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
1 x Self Supporting Galvanised Foundation Boxes (600kg)
1 x Floor 830 hydraulic jack ( 180 deg )
1 x CE Identification Plate

This kit is supplied with the BA230 LCD professional control panel which offers many programmable options including slow down open/close. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.
K830/L1 Floor830 Single Hydraulic Underground System With Slow Down Qty £1,249.00
Add to Basket
Gibidi Floor830 Single Hydraulic Underground System With Slow Down+limits
180 degree rotation Gate leafs up to 3.0 m
Gibidi
1 x BA230 LCD Professional Control Panel
1 x reciever
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
1 x Self Supporting Galvanised Foundation Boxes ( 600kg )
1 x Floor 830 hydraulic jack with limits ( 180 deg )
1 x CE Identification Plate

This kit is supplied with the F4+ control panel which offers many programmable options including slow down open/close. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.
K830/L1/limit Gibidi Floor830 Single Hydraulic Underground System With Slow Down+limits Qty £1,289.00
Add to Basket
Floor 824 single hydraulic underground system with slow Down ( 24v )
180 degree rotation Gate leafs up to 3.0 m
Gibidi
1 x BA24 LCD Professional Control Panel (24v dc )
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
1 x Self Supporting Galvanized Foundation Boxes (600kg)
1 x Floor 824 hydraulic jack ( 180 deg )
1 x Limit switch kit
1 x CE Identification Plate

This kit is supplied with the BA24 LCD professional control panel which offers many programmable options including slow down open/close and anti crushing. It also offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.

Note : if using the limit switches on this kit they must be connected via screened cable with the screen earthed. we do supply this cable in 100 meter drums and the order code is 86447.

K825/L1 Floor 824 single hydraulic underground system with slow Down ( 24v ) Qty £1,375.00
Add to Basket
Gibidi Electro Mechanical Underground Automation System
Gate Leafs up to 3.0 m
Gibidi
1 x F4+ Control
1 x Reciever
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
1 x Galvanised Foundation Boxes
1 x R21 Underground Motors
1 x CE Identification Warning Plate

This kit is supplied with the F4+ control panel. It offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.



KR21/L1 Gibidi Electro Mechanical Underground Automation System Qty £865.00
Add to Basket
Electro Mechanical Underground Kit (230V)
Gate leafs up 3.5 m
Gibidi
1 x F4+ Control
1 x Receiver
2 x 4 Channel Transmitters (433 mHz)
1 x Pair DCF180 Photocells
1 x Galvanised Foundation Boxes
1 x GROUND 610 Underground Motors
1 x CE Identification Plate

This kit is supplied with the F4+ control panel. It offers the facility for safety edges to be connected to provide anti crushing which addresses requirements of EN12453.

K610/L1 Electro Mechanical Underground Kit (230V) Qty £838.00
Add to Basket
Meka SL344/844 backup battery container
To Store Backup Batteries
Gibidi
This must be ordered if battery backup is required for Meka SL sliding gate motors.

It is used to house the charger PCB ( AJ00606 ) and the 2 batteries.
AJ00605 Meka SL344/844 backup battery container Qty £46.00
Add to Basket
Meka SL Personal Key Lock
Personalised Euro Cylinder + Keys
Gibidi
To Fit Meka "SL" sliding gate motors
AJ00600 Meka SL Personal Key Lock Qty £30.00
Add to Basket
Gibidi PASS 1241 sliding gate kit
230vac sliding gate kit
Gibidi
1 x Pass 1241 Motor inc. SC230 control board
1 x Foundation Plate
1 x Receiver
2 x Transmitters ( 4 channel )
1 x Set of DCF180 Photocells
1 x CE Identification Warning Plate

This kit is designed to automate up to 1200Kg sliding gates. The gearbox is oil filled with steel gears so this product is designed for many years of service. The PASS 1240 is fitted with a non standard electric motor giving intensive duty cycles up to 80% usage. This motor is fitted with an encoder to provide anti crushing.
K1241/Z1 Gibidi PASS 1241 sliding gate kit Qty £890.00
Add to Basket
Gibidi PASS 1841 sliding gate kit
230vac sliding gate kit
Gibidi
1 x Pass 1841 Motor inc SC 230 Control Board
1 x Foundation Plate
1 x Receiver
2 x Transmitters ( 4 channel )
1 x Set of DCF180 Photocells
1 x CE Identification Warning Plate

This kit is designed to automate up to 1800Kg sliding gates. The gearbox is oil filled with steel gears so this product is designed for many years of service. This motor will comfortably move extremely heavy gates. This motor is fitted with an encoder to provide anti crushing.
K1841/Z1 Gibidi PASS 1841 sliding gate kit Qty £925.00
Add to Basket
Heavy duty sliding Gate Automation Kit (1200kg)
Single phase 80% Rated system
Casit
1 x Single Phase Motor including KEQ214D Control Panel with built in receiver
1 x Foundation plate
2 x Transmitter ( 4 channel )
1 x Set of Photocells
1 x CE Identification Warning Plate

SLIDYI Sliding gate operator is for installations where the use is intensive such as commercial or industrial properties. The air cooled single phase 230 VAC motor is rated at 80% usage. To comply with EN12453 safety standard we recommend the addition of safety edges to the system. We supply all such equipment please call for further information.
SLIDY/I-KIT Heavy duty sliding Gate Automation Kit (1200kg) Qty £1,110.00
Add to Basket
CASIT SLIDY I Heavy Duty Sliding Gate Motor
1200 Kg
Casit
SLIDYI Sliding gate operator is for installations where the use is intensive such as commercial or industrial properties. The air cooled single phase 230v motor is rated at 80% usage. To comply with EN12453 safety standard we recommend the addition of safety edges to the system. We supply all such equipment please call for further information.


1 x Single Phase Motor Including Control Panel KEQ214D

If a base plate is required please order LL178F1
SLIDY/I CASIT SLIDY I Heavy Duty Sliding Gate Motor Qty £935.00
Add to Basket
Heavy duty sliding Gate Automation Kit (2500kg)
Single phase 100% Rated system
Casit
1 x MR300 Single Phase Slide Gate Motor
1 x Built in control panel ( KEQ214 )
1 x Set of Foundation Mountings

This motor comprises an air cooled heavy duty industrial motor with gearbox that is belt driven via a clutch. The control panel is a heavy duty EQ405 with industrial control relays for the motor.

This system is ideal for very large heavy usage sliding gates or simply where the gate is not necessarily 2500Kg + but you need very intensive use capability.
MR300CRI/KEQ214 Heavy duty sliding Gate Automation Kit (2500kg) Qty £2,130.00
Add to Basket

All prices are exclusive of VAT (20%).